Greenland Equipment Ltd.

Information

2021 Heavy Hitch HH1UO

Our indestructible 3 point hitch receivers redefine the tractor ballast box. With our receivers, you no longer have to choose between adding weight and adding tools to get the job done. Now you can do both. Just add suitcase weights for counterweight and hook up to any 2” receiver compatible attachment.

The Category 1, 3 Point Hitch Receiver Drawbar with Offset Suitcase Weight Bracket is made for sub compact tractors and compact utility tractors up to 45 horsepower and is built to the ASE Standard S278.5. This 3 point hitch receiver has a 3.5” wide offset weight bracket to the side of the receiver, allowing taller weights to be used (weights are allowed to hang down past the lower tube). It comes with 7/8" lower pins and uses a 3/4" top pin. It also allows up to eight suitcase weights to be attached in either direction, forward or back, depending on clearances. This super duty hitch has 3/16” wall thickness on the lower 3×3” square tube opposed to 1/8” on the regular; also includes a welded on 3/8” chain hook. Plus, it has a 2 inch receiver hitch for more pulling options. If you intend to only use 42# suitcase weights, use our Category 1 3-Point Hitch Receiver Drawbar with Suitcase Weight Bracket instead.

Category 1 tractors are rated for up to 45 horsepower. Not sure if your 3 point hitch receiver is category 0 or 1? Just measure the lower 3 point hitch holes. Category 0 will be 5/8" diameter and 1 is 7/8" diameter.

Compatible with:

• All 3 point hitch receiver category 1 systems

• Most 3 point quick hitch systems

• John Deere iMatch systems built to the ASE Standard S278.5

Comes standard with a super durable finish in your choice of Green -G (compatible with John Deere Green), Black -B, or Orange -O (compatible with Kubota Orange) environmentally friendly powdercoat. Select color when ordering.

All Heavy Hitch products are made in the USA by a Minnesota company you can trust. Be confident in the quality and longevity of our products – we use only American made steel and qualified welders.

Features may include:

• Constructed of 3/8" thick steel plate and 3" square box tubing. No cheap angle iron and straps.

• Works with or without a 3 point quick hitch system.

• Compatible with:

• Kubota part #BL8060, 55 pound suitcase weights.

• John Deere part #R66949 or #R66949Y, 42 pound suitcase weights.

• John Deere part #BM19780, 70 pound suitcase weights.

• Other comparable weights from Massey Ferguson, John Deere, Case International, New Holland and more.

• Most 3 point quick hitch configurations and quickly attaches to John Deere, Kubota, New Holland, Case International, and more.