Greenland Equipment Ltd.

  • Box #668 32100 Hwy #3 South
  • Carman, MB R0G 0J0
  • Call Us: (204) 745-2054
  • https://www.greenlandequipment.com/
Print This Page

2024 Landoll B3/30AC Series Base

Information

2024 Landoll B3/30AC Series

BENDI NARROW AISLE ELECTRIC FORKLIFT

The Bendi B3/30AC forklift works in aisles as narrow as 72" (1.83M), has a starting capacity of 3,000 lbs (1361kg) at 24" (600mm) load center and lift heights available to 30' (9.14M).

A 3-wheel articulating forklift with a single poly front drive tire and solid rubber rear tires. Front articulation of 220°, narrow mast and a compact front end allow easy stacking in Very Narrow Aisles. The Bendi B3/30AC can work inside and outside on paved surfaces. It can do the same jobs of a reach truck, in aisles at least 40" (1M) smaller.

EXCEPTIONAL PERFORMANCE AND MANEUVERABILITY

Equipped with the LandActive control and the Landoll DuraSteer™ front wheel hydraulic steering, the B3/30AC provides exceptional control and makes load placement and retrieval superior to the competition.

MAXIMIZES MATERIAL HANDLING PRODUCTIVITY

The versatile Bendi B3/30AC forklift replaces conventional reach and counterbalanced fork trucks in standard warehouse operations. The unique design allows operators to use it as a counterbalance truck indoors or out, while operating in very narrow aisles in your warehouse, replacing reach trucks that require much wider aisles. All tires on the Bendi B3/30AC are 18" (457mm) diameter and the truck has great under clearance for avoiding floor obstructions.

Features may include:

  • 3,000 lb. (1361kg) Capacity at 24" (600mm) Load Center
  • 3-Wheel Design, Single Front Wheel Drive Provides Excellent Maneuverability and Traction
  • Ergonomic Design for Exceptional Operator Comfort and Safety
  • Integral Sideshifter Makes Placing and Picking Loads Effortless
  • DuraSteer™ Front Wheel Hydraulic Steering Provides Smooth, Reliable, Long-Lasting Steering Control
  • LandActive Control Provides Enhanced Traction Control Based on Steering Angle
  • Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators
  • High Visibility Mast Allows Optimum Safety and Control
  • AC Traction and Hydraulic Motors Ensure Minimal Maintenance and High Efficiency
  • High Efficiency Curtis AC Controllers Provide Trouble Free Operation
  • Interactive LCD Status Monitor (BDI with Lift Interrupt, Hour Meter with Service Monitor, Diagnostic Code Display, Input Device Calibration)
  • 48 Volt Electrical System and Large Capacity Battery Compartment

Photos

Highlights

  • Carman, Manitoba
  • 2024
  • Landoll
  • B3/30AC Series Base
  • Available
  • Chassis: 44.8 in (1,138 mm)
  • Cab Floor: 31 in (787 mm) | Overhead Guard: 89 in (2,261 mm)

Specifications

  • 2024
  • Landoll
  • B3/30AC Series
  • Base
  • General
  • Hydraulic Rating: 12 kW | Drive Rating: Single Front 5.1 kW
  • Front (1 Each): 18x7 in (457x178 mm) | Rear (2 Each): 18x7 in (457x178 mm)
  • Travel - Loaded: 5.5 mph (8.9 kph) / Unloaded: 6 mph (9.7 kph) | Lift - Loaded: 90 fpm (27.4 mpm) / Unloaded: 110 fpm (33.5 mpm) | Lowering - Loaded: 100 fpm (30.5 mpm) / Unloaded: 90 fpm (27.4 mpm)
  • Gradeability: Unloaded 8% / Loaded: 5%
  • Load Center: 24 in (600 mm) | Mast Tilt - Fwd / Back: 1 / 2 deg | Lost Load Center: 14.2 in (361 mm) | Underclearance: 3 in (76 mm) | Front Articulation: 220 deg
  • 72.6 in (1,844 mm)
  • To Face of Forks: 112.9 in (2,868 mm)
  • Cab Floor: 31 in (787 mm) | Overhead Guard: 89 in (2,261 mm)
  • 51 in (1,295 mm)
  • Chassis: 44.8 in (1,138 mm)
  • 3,000 lbs (1,361 kg)
  • With Battery: 12,800 lbs (5,818 kg)