2025 John Deere 1580 TerrainCut™ 62 in. Fastback™ rear discharge
- Year 2025
- Make John Deere
- Model 1580 TerrainCut™
2025 John Deere 1580 TerrainCut™ 62 in. Fastback™ rear discharge
TerrainCut™ Front Mower7-Iron™ PRO Side Discharge or FASTBACK™ Rear Discharge Deck
Diesel Engine
Compatible with select front blade, snow blower and broom attachments
Features may include:
- Diesel engine has high-quality features to minimize operating cost
- The 1500 Series TerrainCut™ Front Mowers are powered by liquid-cooled, 3-cylinder diesel engines.
- These engines feature low levels of exhaust and emissions, reduced noise levels, and excellent fuel economy. They also meet the necessary Environmental Protection Agency (EPA) Tier 4 emissions requirements.
- The 1570, 1575, 1580, and 1585 models are biodiesel compatible from the factory up to B20. The 1550 model requires.
- Key features of the engine include:
- Economical cast-in block cylinder design for good cooling and long life
- Indirect fuel injection (1550)
- Direct fuel injection (1570, 1575, 1580, 1585)
- Injects fuel directly on top of pistons for more efficient combustion
- Delivers more horsepower per gallon of fuel
- Improves starting
- Develops more horsepower per gallon of fuel and improves starting
- Aluminum alloy pistons with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat transfer characteristics
- Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by gas and noise from the piston slap
- Higher top rings on the piston and a thinner head gasket greatly reduce the volume of unburned waste gases and increase combustion efficiency
- Timing gears and injector drive gears utilize helical profile gears to help lower engine noise; gear teeth have a newly designed roll-off profile, giving almost no clash, no noise, and no backlash
- Fuel filter with replaceable element
- Full-pressure intake manifold provides quick starts in temperatures down to 0°F (-18°C)
- Auto-bleed fuel system – there is no need to prime the system if the tractor runs out of fuel; the system self-primes the injection pump, lines, and injectors, providing fast fuel recovery
- Key start and shutoff eliminates fuel shut-off knob; electric solenoid shuts fuel supply off immediately when key is turned off
- See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
- Enclosed engine compartment to keep out debris and lower sound levels
- Sealed radiator compartment to keep trash and debris on outside of hood
- Excellent torque for plenty of lugging power when operating in tough mowing conditions
- Full-pressure lubrication for positive lubrication, even when operating on slopes
- Dual-element, dry-type, replaceable air cleaner completely sealed for effective cleaning
- 90 percent to 95 percent of dirt ejected before it reaches the paper element
- Secondary safety element for additional filtering
- Progressive-type air restriction indicator to let operator know when the filter needs servicing
- Automotive-type alternator for plenty of charge to the battery and power for accessories
- 75 amp for open-station models
- 95 amp for ComfortCab models
- Automatic initiation of air heater for easier cold-weather starting
- Automotive-sensing system tells operator when engine is ready to start
Engine
Engine Manufacturer
3TNV88C
Engine Power
Gross PS: 37.4 hp (27.5 kW)
Rated Engine Speed
3,000 rpm
Cylinder Liners
Three
Displacement
100.2 cu in. (1.64 L)
Cooling
Liquid
Air Cleaner
Dual element dry type | Air restriction indicator: Standard
Fuel Injection
Direct
Engine Torque, Maximum
At 1,950 rpm: 80.4 lb-ft (109 Nm)
Fuel System
Fuel Type
Diesel (B20 compatible)
Drivetrain
Transmission
Hydrostatic full time 4WD, on-demand
Drive System
Speed and direction control: Two-pedal foot | Hi/Lo range: No, single speed transmission
Steering
Hydraulic cylinder | Turns lock-to-lock: 2 maximum, 1.5 minimum
Brakes
Brake System Type
Internal wet disk | Individual turn brakes: Standard | Master brake: Standard, locking
Wheels & Tires
Wheels
Drive: 26x12-12 | Steering: 20x10-10
Wheels, Caster Specifications
Type: Flat free / Size: 11x4-5
Battery
Battery
12 V
Electric
Alternator
75 amp
Charging System
Automotive type
Operational
Operating Speed
Travel speed: Hi forward: 0-15 mph (0-24 km/h) / Hi reverse: 0-5 mph (0-8 km/h) | Speed range: 0-15 mph (0-24 km/h) | Blade tip speed: 18,000 fpm (5,486 m/min)
Hydraulics
Hydraulic Pump
6.3 U.S. gpm (23.8 L/min)
Hydraulic Type
Open center | Spool valve: Front lift, standard
Lift Cylinders
Two
Dimensions
Length
Less mower deck: 86.7 in. (220.2 cm)
Height
Cutting: 1-6 in. (2.54-15.24 cm)
Overall Height
with ROPS: 83.7 in. (213 cm) | with ROPS folded: 59 in. (150 cm)
Overall Width
Narrow 26x12 tires: 55.4 in. (140.7 cm) / Wide 26x12 tires: 60.3 in. (153.2 cm)
Cutting Width
62 in. (157 cm)
Ground Clearance
7 in. (17.8 cm)
Wheelbase
49.2 in. (125 cm)
Deck Thickness
7 gauge / 0.180 in. / 4.6 mm
Dimensions
Mower deck size: 60 in. (152 cm)
Capacities
Fuel Capacity
Tank: 16 U.S. gal. 60.6 L
Cooling System
8 U.S. qt (7.6 L)
Weights
Weight, As Shipped
Net weight without mower or fuel: 2,120 lb (962 kg)
Features
Construction Material, Deck
One-piece stamped steel; 7-Iron PRO
Features
ROPS: Standard (folded) | Belt tensioning: Spring loaded
Warranty
Warranty
24 months