2024 Landoll Construction Disc 6510

Current Landoll ICON-Construction-Equipment Construction Disc

Swipe to View More

Year 2024
Make Landoll
Model Construction Disc

ICON CONSTRUCTION DISC

Take your jobsite tillage operations to the next level with the 6510 Construction Disc from ICON – maximum durability is built-in.

TAKE JOB SITE TILLAGE OPERATIONS TO THE NEXT LEVEL

Built on an 8” x 8” and 8” x 6” x ½” wall, all-welded one-piece frame, the ICON 6510 Construction Disc can take what tough industrial construction jobs demand. The frame is carried on a 5 1/2” lift axle with 1” wall thickness. Maintenance-free UHMW bearings support the lift axle. Road clearance in transport is 11”. The 4 1/2” diameter cylinders all have 2 1/2” cylinder rods. Industrial rated hoses (4,300 PSI) are used throughout. The disc gang uses a 2 1/2” gang bolt with nuts on both ends. 32” x 10 mm or 36" x 12 mm notched blades are spaced 17 1/2” apart. C ast spacer spools that are 8 1/2” in diameter provide exceptional blade support. 719 lbs. per blade provides exceptional penetration capacity. Gangs have oil bath bearings. Bearing supports are an integral part of the one-piece frame. Adjustable scrapers keep the blades free from the build-up of material.

DURABLE AND DEPENDABLE

The 6510 is not a modified agricultural offset disc. This is the construction disc that contractors have asked for. It’s just the right size to fit the niche market that other manufacturers have over looked. If you need a tool that was designed with the user in mind with maximum durability built-in, look no further than the 6510 Construction Disc from ICON.

Features may include:

10’ 9” Working Width

Welded One-Piece Main Frame with ½” Wall x 8” x 8” and 8” x 6” Members

Heavy-Duty 5 ½” Lift Axle with 1” Wall Thickness

UHMW Lift Axle Bearings

32” x 10 mm or 36" x 12 mm Notched Disc Blades Spaced at 17 1/2”

20 Degree Front Blade Angle

18 Degree Rear Blade Angle

719 lbs. per Blade

Solid 8 ½” Diameter Cast Spacer Spools

Round 2 1/2” Gang Bolt with Nuts on Both Ends

Oil Bath Bearings

4 1/2” Cylinders Throughout

4,300 PSI Hydraulic Hoses

Rigid Cat. IV Hitch with Slotted Hole and 360 Degree Swivel

Gang Wrench

Yellow Industrial Paint

Safety Warning Lights

Engine

Engine Power Requirements: 20 to 30 HP (15 to 22 kW) per Foot

Wheels & Tires

Tires, Rear Specification (2) 327/550 x 16.5 SL

Wheels Hubs: 8-Bolt, 7,500 lbs. (3,402 kg)

Chassis

Frame Type 8 in. x 8 in. x 0.5 in. and 8 in. x 6 in. x 0.5 in. (203 x 203 x 13 mm and 203 x 152 x 13 mm) Welded One-Piece Frame

Hitch/Type Pintle 360° Swivel Hitch

Dimensions

Dimensions Blade Diameter: 32 in. (813 mm) or 36 in. (914 mm) | Blade Thickness: 10 mm or 12 mm | Blade Spacing - Front: 17.5 in. (445 mm) / rear: 17.5 in. (445 mm) | Blade Scrapers: 11.5 in. x 0.375 in. (292 x 9.5 mm) | Gang Angle - Front: 20 Degree / rear: 18 Degree | Gang Shaft: 2.5 in. (63.5 mm) | Transport Axles: 5.5 in. (140 mm) Lift Axle, UHMW Bearings | Lift Cylinder: 4.5 in. x 12 in. (114 x 305 mm) | Leveling Cylinder: 4.5 in. x 8 in. (114 x 203 mm) | Draft Control Cylinder: 4.5 in. x 8 in. (114 x 203 mm)

Width, Working Position 10 ft. 9 in. (3.3 m)

Transport Width 11 ft. 11 in. (3.6 m)

Ground Clearance Transport: 11 in. (279 mm)

Spindle Diameter 3 in. (76 mm) Slip-In Spindles

Weights

Weight Approximate With 32 in. Blades: 11,500 lbs. (5,216 kg) / With 36 in. Blades: 12,396 lbs. (5,623 kg)

Features

Features Number of Disc Blades - Front: 8 / Rear: 8 | Gang Bearings Standards: Rigid Mount Integral with Frame | Gang Bearings: Oil Bath Bearings

2024 Landoll Construction Disc 6510