2024 Landoll B40AC-DR / B50AC-DR Forklift B40AC-DR

Current Landoll Material-Handling Bendi B40AC-DR-B50AC-DR-Forklift

Swipe to View More

Year 2024
Make Landoll
Model B40AC-DR / B50AC-DR Forklift

DEEP REACH

The Bendi B40AC-DR and B50AC-DR forklifts can stack loads two deep in aisles as narrow as 96” (2.43 M), have a starting capacity of 2,500 lbs (1,136 kg) at 24” (600 mm) load center and lift heights available to 35' 5" (10.80 M). The reach from face to mast is 52” (1,321 mm) and the integral pantograph reach stroke is 41” (1,041 mm) They have a 33” (838 mm) wide tilting and side shifting fork carriage.

They are a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. The Bendi B40AC-DR and B50AC-DR can work inside and outside on paved surfaces and have a floating front axle allowing the truck to ride smoothly over uneven floors. They can do the same jobs as reach and counterbalanced trucks but in much narrower aisles.

EXCEPTIONAL PERFORMANCE AND MANEUVERABILITY

Equipped with the Landoll DuraSteerTM front wheel hydraulic steering, the B40AC-DR / B50AC-DR provides exceptional control and makes load placement and retrieval superior to the competition.

3-STAGE MAST

The new mast has a rigid mounting and as standard a tilting and side shifting carriage. The new design offers increased mast rigidity, capacity and improved visibility. Dual free lift cylinders and optimized hose and chain routings have improved visibility thru the mast. Lowered heights have been reduced and a new mounting position on the 48” (1,219 mm) wide front axle reduces the distance from the face of the forks to the back of the axle thereby improving aisle performance.

Features may include:

2,500 lb. (1,136kg) and 3,000 lb. (1,364kg) Capacity at 24" (600mm) Load Center

Four-Wheel Design, Dual Rear Wheel Drive

Integral 8" (200mm) Stroke Sideshifter and 36" (914mm) High Load Backrest

Hydraulic Power Steering – Front Wheel Steer

Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle

AC Traction and Hydraulic Motors Ensure Minimal Maintenace and High Efficiency

Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators

High-Efficiency Curtis AC Controllers Provide Trouble Free Operation

Interactive LCD Status Monitor (BDI with Lift Interrupt, Hour Meter with Service Monitor, Diagnostic Code Display, Input Device Calibration)

48 Volt Electrical System

Motor

Motor Power Hydraulic Motor Rating - Continuous Duty: 12 kW | Drive Motor Rating - Continuous Duty: 2 x 5.6 11.2 Total kW

Wheels & Tires

Wheels Front (1 each): 14x5 in (356x127 mm) | Rear (2 each): 18x7 in (457x178 mm)

Operational

Operating Speed Travel - Loaded: 6.5 mph (10.5 kph) / Unloaded: 7 mph (11.3 kph) | Lift - Loaded: 90 fpm (27.4 mpm) / Unloaded: 110 fpm (33.4 mpm) | Lowering - Loaded: 100 fpm (30.5 mpm) / Unloaded: 90 fpm (27.4 mpm)

Operating Conditions Gradeability Unloaded: 15% / Loaded: 15%

Dimensions

Wheelbase 73.4 in (1,864 mm)

Overall Length To Face of Forks: 114 in (2,896 mm)

Height Cab Floor: 31.3 in (795 mm) | Overhead Guard: 89 in (2,261 mm) | Battery Compartment: 19.24 in (489 mm)

Seat Height 52 in (1,321 mm)

Width Chassis: 50 in (1,270 mm) | Front Axle: 42 in (1,067 mm)

Length Fork: 40 in (1,016 mm)

Capacities

Hitch Lift Capacity 4,400 lb (1,996 kg)

Weights

Weight With Battery: 16.600 lb (7,530 kg)

2024 Landoll B40AC-DR / B50AC-DR Forklift B40AC-DR