2018 Meyer Manufacturing Corporation 7000 Series V-Force V-Force 7400 Truck Mount

2018 Meyer Manufacturing Corporation 7000 Series V-Force V-Force 7400 Truck Mount

The Meyer V-Force 7000 Series V-Spreader combines technology from our Industrial Series models with the capcities of our V-Max series to give you maximum performance in the 400 - 500 bushel range. Our unique Rear Discharge System is unlike all others, incorporating two shaft-driven vertical expellers. They are fed by an aggressive 3 auger design which powers through pack manure, semi solids, sand sludge, slurry, litter, biosolids, and certain lime and compost products. Rear Discharge keeps your tractor and spreader clean while maximizing the value of the product you are applying!

Pull Type or Truck Mount models available

Meyer patented straight-line flow - provides the ultimate spread performance. Better pattern, faster unload time, less horsepower & minimal wind drift!

Rear Unload Rules! When it comes to spreading, keep the mess behind you. Provides superior application too.

3 auger system, only one of its kind! Lower 20" augers feed the door while the upper 13" auger levels the load forward and eliminates bridging.

Thanks to the dual lower auger arrangement, the Meyer spreader body is wide down low. This means we can maintain a lower load height with maximum capacity!

independent Lower Auger Shear Bolt Protection, a Meyer exclussive. Allows you to protect an obstructed auger while still unloading a majority of the load with the other auger. Bound to save you work!

Heavy Duty Drivetrain - V-Force models feature #120 final drive chains #80 expeller and first reduction. HD jackshafts / spring chain tensioning / remote greasing on hard to reach spots!

Automatic Roller Chain Oiler is standard. Oils all roller chains each time you cycle the tailgate. Eliminates reduced access and manure contamination associated with oil bath systems.

Sectionally Flighted 20" Lower Augers propel material to the rear of the spreader. Full auger flighting / No Paddles to wrap, freeze or wedge material

Our Revolutionary T-Post auger hold-down retains a nylatron (non maintenance) bushing and maintains tight auger tollerance to the tank floor. Provides you more complete cleanout!

Vertical Twin Expellers pulverize material for smooth, even application. This machine bands material across the back like a ferilizer spreader would, unlike side delivery units that attempt to chuck all the product out one side. Paddles are replacable and reversible!

Check out this Shock Load Coupler System....Drastically reduces "shock/stress" related to rocks and frozen material to your drivetrain. This dampening system combined with a torque disconnect clutch protect your expeller drive sytem.

Direct shaft drive expellers (includes our shock load coupler). No chains on the rear of this spreader. V-Force models feature an overrunning clutch system to reduce backlash on the drivetrain.

540 CV PTO is standard

All Meyer spreaders feature a full channel frame. Stress from the hitch, axles and body are transmitted throught the frame network. Take a look at the unibody design on most V-Spreaders.

All Meyer spreaders feature a full channel frame. Stress from the hitch, axles and body are transmitted throught the frame network. Take a look at the unibody design on most V-Spreaders.

The center lift door system eliminates arms and linkages - it is standard on the 7500 model

This 4" side extension is available for the 7400. It increase it's capacity to 465 bushel or 2,150 gallons.